MERIT INDUSTRIES Megatouch XL, Техническое руководство по обслуживанию

Страница: 44 / 65

CMOS Configuration Procedure for the Megatouch XL*
The CMOS configuration should only be performed if your Megatouch XL experiences problems
booting up.
1. Make sure the game is turned off.
2. Plug keyboard into the J4 port on the motherboard assembly.
3. Turn on the power.
4. Look for the sign-on signature.
5. After the sign-on signature, the screen will read “Press (DEL) to enter SETUP.”
6. As soon as you see this message, press DEL.
7. “Main Menu” will appear on the screen.
8. Use the DOWN ARROW key to highlight “Load ROM Default Values.”
9. Press ENTER.
10. “NOTICE” message will appear on screen.
11. Press ENTER.
12. “Main Menu” will appear on the screen.
13. Use the UP ARROW key to highlight “System Setup.”
14. Press ENTER.
15. Use DOWN ARROW to highlight “Diskette Drive A:”
16. Press PAGE UP four (4) times, until “Not Installed” appears.
17. Press ESC.
18. “Main Menu” appears on the screen.
19. Use DOWN ARROW to highlight “Boot Options.”
20. Press ENTER.
21. Press PAGE UP one time. “C: ONLY” appears on the screen.
22. Use DOWN ARROW to post errors, PAGE UP one (1) time to disable, then press ESC.
23. “Main Menu” appears.
24. Press the DOWN ARROW key to green PC feature, press ENTER.
25. A customized gray box appears.
26. PAGE UP to “Disabled.”
27. Press ESC.
28. Press F10.
29. “Warning!” appears on screen.
30. Press the “Y” key.
31. Press ENTER.
32. Wait for the system to reboot and then turn the power off.
33. Unplug the keyboard from J4.
34. Turn on the power.
*The CMOS setup only applies to games using the DeAmertek motherboard. Games using
Telco motherboards will not need to have the CMOS set manually.