
COPYRIGHT © 2003 MERIT INDUSTRIES, INC.
PM0378-07 MEGATOUCH COMBO JUKEBOX™ OWNER’S MANUAL 13
NOTE: You will need to adjust the moni-
tor settings on any games after they are
linked to display the TouchTunes® Op-
erator Setup. Enter the TouchTunes®
Setup Screen on the game and then
adjust the monitor settings so the
graphics are displayed properly. This
will not affect the monitor settings of
the game screens.
To link to additional games:
19. M a k e s u r e a l l g a m e s ( e x c e p t
FORCE Classic games) that are to
be linked have the Hi Resolution
feature enabled in order to prop-
erly display the current Touch-
Tunes® interface . Press the SETUP
button inside the game and enter the
System Menu, then touch the Options
icon. Page through the options and
make sure the Hi Resolution feature is
checked. If it is not enabled, certain
TouchTunes® features will not be avail-
able.
NOTE: It is recommended that you per-
form a touchscreen calibration after
enabling Hi Resolution.
NOTE: The TouchTunes® interface will
not display properly in FORCE Classic
games if the Hi Resolution feature is
enabled. Certain TouchTunes® fea-
tures will therefore not be available in
any linked FORCE Classic games be-
cause they are only accessible in Hi
Resolution mode.
20. Turn off all games that will be con-
nected to the Megatouch Combo Juke-
box™.
21. Connect one end of the Ethernet cable
to one of the Mega-Link® connectors
on the unit (see Figure 7).
22. Connect the other end of the Ethernet
cable to the Ethernet coupler on the
back of the game (the Ethernet coupler
is the one on the left if you are facing
the back of the game).
23. Repeat for an additional game if de-
sired.
NOTE: Do not use the Ethernet hub in-
side the unit for linking other games.
Connecting a Microphone
24. If desired, connect a microphone to the
MIC IN connector on the SBC and pass
the cable through the slots at the bot-
tom of the access panel.
Connecting an External Audio Source
25. If desired, connect the left and right
RCA connectors running from an ex-
ternal audio source, such as a CD or
tape player, to the LINE IN connectors
on the SBC.
26. Replace the access panel.
Connecting to Tune Central™
If you will not be running Tune Central™,
skip ahead to the next section.
27. Choose an appropriate location for the
Tune Central™ unit. It should be placed
on a flat surface away from heat
sources such as vents or amplifiers.
28. Connect the supplied power source to
the power connector on the front of
the Tune Central™ unit (see Figure 3)
and the supplied power cable to the
power source. Then plug the power
cable into a suitable grounded outlet.
Use the same guidelines as those
foundin the beginning of the Site Prepa-
ration section on Page 2 to choose an
electrical outlet.
29. Connect one end of a customer-sup-
plied standard Ethernet cable to the
Ethernet connector on the Tune Cen-
tral™ unit (see Figure 3) and the other
end to one of the Mega-Link connec-
tors on the jukebox (see Figure 7).