Meridian G92, Руководство по установке

Страница: 45 / 64

C o n f i g u r i n g
t h e D V D p l a y e r
Configuring the sources
If you are using the DVD player as the controller or video switcher
in your Meridian system, you can use the
Source setup option on
the Setup menu to configure each of the sources.
• Highlight Source setup… in the Setup menu, and press Enter .
The
Source setup
menu will be displayed:
To configure a source
• Press the source key on the remote corresponding to the source
you want to configure.
The Source configuration menu shows the values of each option
defined for that source.
To change an option
• Highlight the corresponding option in the
Source
configuration
menu and press
Enter
, select the value you want
to use, and press Enter to select it.
The following table explains the function of each of the options:
Option Values Description
Enabled Yes, No Whether the source appears on the list of sources.
Audio input A1-A3, D1-D2, O1-O2, Disc, Tuner The audio input used for the source; analogue, digital, optical, and
internal; see below.
Sensitivity 2.5V, 2.0V, 1.0V, 0.7V Allows you to set the sensitivity of the analogue inputs.
Video input V1-V2, S1-S3, Y1, Bypass, Disc Video input used for the source.
Video lock Normal, Poor Improves locking for poor video sources
Trigger High, Low Trigger output for the source.
HDMI switch 1 to 4 Available if HDMI switch is set to On in the HDMI setup menu.
Allows the G92 to control the input on the HDMAX 421.
Comms cat/add -C, 1C-9C, NC/1A-8A Allows you to set the Comms category and address.