Meridian G92, Руководство по установке

Страница: 38 / 64

C o n f i g u r i n g
t h e D V D p l a y e r
The Audio setup menu lets you select the audio settings of the
DVD player.
• Highlight Audio setup… in the Setup menu, and press Enter .
The Audio setup menu will be displayed:
DVD player application
The options on the Application menu allow you to configure
the audio outputs for optimum performance, depending on the
capabilities of the equipment you are connecting to. For more
information about the applications see
Applications, page 10.
• Highlight Application in the Audio setup menu, and press
Enter .
The
Application
menu is displayed:
These options are explained in the following table:
Configuring the audio
Select this option For this application
Aux To use the DVD player as a preamplifier, connected via the AUX DIGITAL output to a pair of DSP
loudspeakers or a digital surround controller.
Analogue 2Ch (Type 0) To use the DVD player as a 2-channel preamplifier, connected via the main LEFT and RIGHT ANALOGUE
outputs to analogue active loudspeakers, or passive loudspeakers with power amplifiers.
Analogue MCh To provide a fixed level multichannel analogue output for connection to a surround controller with a
multichannel analogue input.
Digital 2Ch (Type 1) To use the DVD player as a preamplifier, connected via the L/R MAIN DIGITAL output to a pair of DSP
loudspeakers or a digital surround controller.
Digital MCh (Type 3/4/5) To connect the DVD player to the multichannel inputs of a Meridian digital surround controller via the L/R,
C/LFE, and SURR MAIN DIGITAL outputs.
HDMI 2Ch To use the DVD player as a preamplifier, connected to a 2-channel HDMI receiver.
HDMI MCh To connect the DVD player to a multichannel HDMI receiver.
Surround (Type 6) To use the DVD player as a surround controller, connected directly to a surround system consisting of DSP
loudspeakers, analogue active loudspeakers, or passive loudspeakers with power amplifiers.