Meridian DSP5200 Скачать руководство пользователя страница 48

Страница: 48 / 73

CONNECTING UP THE

DSP LOUDSPEAKERS

To connect three or more DSP loudspeakers in a
Meridian surround system

"1/*1/Ê *1/

Ê *1/

Ó£

"1/*1/

"1/*1/Ê *1/

/Ê *1/

"1/*1/

"1/*1/Ê *1/

/Ê *1/

"1/*1/

-*ÊÕ`Ã«i>iÀ

iÌÀiÊ>ÃÌiÀ®

/Ê"1/*1/-

-xÊi>`

xÊi>`

-xÊi>`Ê`}Ì>ÊÕÕÃi`®

iÀ`>Ê-ÕÀÀÕ`Ê*ÀViÃÃÀ

x££Ê-«>ÌVÊLÝ

-xÊi>`

-*ÊÕ`Ã«i>iÀÊqÊ>Ê,

-*ÊÕ`Ã«i>iÀÊqÊ>Ê

If your system includes more than two Meridian DSP loudspeakers you will

need a 511 S-patch box (available separately) to link together the S5 leads

from each speaker, as shown above.

Note:

This does not apply to the 861,

which includes a built-in patch box.

• Use the comms part of an M5 lead to connect one of the COMMS

sockets on the Meridian Surround Processor to the DSP loudspeaker you

have chosen as the master (typically the centre speaker).

• Use the audio part of the M5 lead to connect the DSP loudspeaker to

the appropriate digital output on the Meridian Surround Processor.

• Connect the COMMS output from the master DSP loudspeaker to one

socket on the 511 using an S5 lead.

• Link all the other DSP loudspeakers together in pairs using S5 leads, as

shown in the illustration.

• Connect each pair of DSP loudspeakers to the appropriate digital output

on the Meridian Surround Processor, using an S5 lead. The other part of

the S5 lead is used to distribute the COMMS from the 511 to each pair of

DSP loudspeakers.

Содержание DSP5200










































































Результаты поиска

Содержание DSP5200

Отзывы:

Meridian DSP5200, Руководство пользователя, Страница: 48 / 73

Результаты поиска

Содержание DSP5200

Отзывы: