Meridian DSP5200 Скачать руководство пользователя страница 39

Страница: 39 / 73

DSP7000

Unpacking

Before you begin installation you should ensure that your DSP

loudspeakers are the correct voltage for your local AC supply. If they are

not, do not try to install them, and contact your dealer.

You should not make any connections to the DSP loudspeakers, or to any

other component in your system, while the AC power supply is connected

and switched on.

Unpacking

The unpacking instructions are provided on a separate leafl et enclosed

with the speakers. Please refer to this before proceeding.

Care when unpacking

Take great care when unpacking or repacking the DSP loudspeakers that

you do not put undue pressure on the face containing the drive units, as

they may be damaged if pressed.

Components

Each pair of DSP loudspeakers is supplied with the following components:

•

The DSP loudspeakers complete with grilles.

•

A hex wrench (3mm) for the drive units.

•

Six screw-in spikes with lock nuts and feet together with a wrench for

fi tting them.

•

MSR+ remote, battery and user guide.

•

One power cord per speaker.

•

Meridian M5 lead (8m).

•

Meridian S5 lead (8m).

•

This user guide.

If any of these items is missing please contact your dealer. We suggest that

you retain the packaging carefully for maximum protection in transit.

Caution

Meridian Audio has taken every care in the design, assembly, fi nishing and

packing of this product. The high gloss fi nish on parts of the cabinet is

achieved by painting up to fi ve coats of polyester lacquer onto the

plywood, each one hand polished.

Due to the product size and high technology cabinet construction, small

marks on the lacquer surface may be visible when unpacked. These small

marks can usually be removed as described in

Cleaning

, page 62.

Содержание DSP5200










































































Результаты поиска

Содержание DSP5200

Отзывы:

Meridian DSP5200, Руководство пользователя, Страница: 39 / 73

Результаты поиска

Содержание DSP5200

Отзывы: