Meridian DSP5200 Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 73

Meridian DSP5200 Скачать руководство пользователя страница 35

DSP6000 AND DSP6000C

28

• Connect the other end of each lead to the socket on the back of the

base unit.

Tightening the drive units

The DSP loudspeakers typically take about two weeks of normal use for the

drive units to settle. It is therefore recommended that you tighten the

mounting bolts on each drive unit every few days during this period.

Tighten the bolts in symmetrically opposite pairs using the 3mm hex

wrench supplied.

You should then check and if necessary retighten the drive units every few

years.

To dismantle the loudspeakers

When dismantling the speakers always switch off and disconnect the power

fi rst, then disconnect the head unit from the base unit.

Note: Do not disconnect the head lead while the unit is connected

to the AC supply and switched on.

It is advisable to remove the head units when moving the speakers. This is

achieved by disconnecting the head lead from the base unit and lifting off

the head. Take care while the head is not in position as this exposes its

mounting spikes. While not in place the head should be stored safely but

care should also be taken of the surface they are placed upon as it may be

damaged by the cups.

«
...
33
34
35
36
37
...
»

Содержание DSP5200










































































Отзывы:

Нет отзывов