Merida City Bikes Скачать руководство пользователя страница 77

Страница: 77 / 114

Make sure your rechargeable battery is in

sound condition

(e)

. Do not open, disassem-

ble or crush the battery. Risk of explosion!

Make sure your rechargeable battery

is not

exposed to mechanical impacts.

Keep your battery away from fire and heat.

Risk of explosion!

Batteries must not be short-circuited. There-

fore store them in a safe storage area and

make sure the battery is not short-circuited

accidentally (e.g. with another battery). In addition,

the rechargeable battery must not be stored inappro-

priately, e.g. in a box or in a drawer where they can be

short-circuited by other conductive materials or where

they can short-circuit each other. Do not deposit any

objects in the storage area (e.g. clothes).

Make sure to use the battery only for the

MERIDA pedelec for which it is designed.

When you remove your battery from the

holder for charging it

(f)

with your MERIDA

pedelec left in the open during the charging

process, you should protect the connections, e.g. with a

plastic bag against rain, water, moisture and dirt

(g)

. If

the connections of the rechargeable battery are soiled,

clean them with a dry rag.

Make sure not to discharge your rechargeable

battery completely (also referred to as depth

discharge). This occurs often when the bat-

tery has run out completely and the MERIDA pedelec

was left standing for some days. Depth discharge

will affect the rechargeable battery of your MERIDA

pedelec permanently. A deep-discharged battery can

only be recharged in exceptional cases and with special

chargers. Contact your MERIDA dealer.

If the rechargeable battery or the charger (or

parts of it) must be replaced, only use original

spare parts. Contact your MERIDA dealer, if

necessary.

Charge the battery at an ambient tempera-

ture of approx. 20 degrees Celsius. Therefore,

before starting the charging, wait until the

temperature of the battery has increased or decreased

after a ride in cold weather or hot weather.

Do not dispose of your rechargeable battery

in the normal household rubbish

(h)

! It must

be disposed of according to battery dispos-

al regulations. Therefore, sellers of new rechargeable

batteries must provide collection of old batteries and

appropriate disposal. If you are in doubt or if you have

any questions, contact your MERIDA dealer.

Remove the rechargeable battery from your

MERIDA pedelec or MERIDA e-bike, if you

do not use your MERIDA pedelec for a longer

period of time and keep it clean and dry.

Содержание City Bikes



















































































































Результаты поиска

Содержание City Bikes

Отзывы:

Похожие инструкции для City Bikes

Бренды по названию

Популярные бренды

Merida City Bikes, Руководство по эксплуатации

Результаты поиска

Содержание City Bikes

Отзывы:

Похожие инструкции для City Bikes

Бренды по названию

Популярные бренды