Merida City Bikes Скачать руководство пользователя страница 89

Страница: 89 / 114

Systems in which the kids’ bike is coupled to the adult’s
bike are more suitable.

Towing devices affect the braking behavior of your
MERIDA bike. Therefore, before riding with a kids’ bike
towing device on public roads, practice riding and brake
behavior without passengers in an area free of traffic!

Towing devices have a strong influence on

the riding characteristics of your MERIDA

bike. The weight of both the hitched bike and

the child will make the bike somewhat top-heavy. Your

MERIDA bike may tend to wobble. Practice getting on

and off, and actual riding. Remember when taking cor-

ners that the MERIDA bike is much longer when it has

a towing device!

It is also important for you to practice with

your child how to behave on a hitched bike

during the ride. Make sure your child wears a

helmet even when riding on a coupled or attached bike.

Set a good example by wearing a helmet, as well!

Only buy tested towing devices (e.g. DIN/

GS tested systems) and have them properly

mounted. The manuals of the manufacturers

included in the delivery of the system provide detailed

information in this regard.

When riding in the dark the attached kids’

bike should be fitted with the prescribed light-

ing

(e)

, i.e. the latter should be marked with

a wavy line and the letter “K”

(f)

. For more information

see the chapter “Legal requirements for riding on public

roads“. If the bottle dynamo’s roller does not spin, we

recommend a tested battery-powered rear light.

If you want to use your MERIDA bike to

mount a towing device, please check wheth-

er it is designed for such a device. If in doubt,

ask your MERIDA dealer.

If you want to use your MERIDA pedelec or

speed pedelec to mount a towing device,

please check whether it is designed for such

a device. If in doubt, ask your MERIDA dealer.

Содержание City Bikes



















































































































Результаты поиска

Содержание City Bikes

Отзывы:

Похожие инструкции для City Bikes

Бренды по названию

Популярные бренды

Merida City Bikes, Руководство по эксплуатации

Результаты поиска

Содержание City Bikes

Отзывы:

Похожие инструкции для City Bikes

Бренды по названию

Популярные бренды