Merida City Bikes, Руководство по эксплуатации

Страница: 100 / 114

100
Recommended torque settings
All bolted connections of the MERIDA bike components have to be tightened carefully and checked regularly to ensure the safe and reliable operation of
the MERIDA bike. This is best done with a torque wrench that disengages at the desired torque value or a click-type torque wrench. Tighten carefully by ap-
proaching the prescribed maximum torque value in small steps (0.5 Nm increments) and check in between the proper fit of the component. Never exceed the
maximum torque value indicated by the manufacturer!
Where no maximum torque setting is given start with 2 Nm. Observe the indicated values and observe the values on the components and/or in the operating
instructions of the component manufacturers on this MERIDA CD-ROM.
Component Bolted connections Shimano
1
(Nm) SRAM/Avid
2
(Nm) Tektro
3
(Nm) TRP
4
(Nm)
Rear derailleur Mount (on frame/derailleur hanger) 8 - 10 8 - 10
Cable clamp 5 - 7 4 - 5
Pulley wheels 3 - 4
Front derailleur Mount on frame 5 - 7 5 - 7
Cable clamp 5 - 7 5
Shifter Mount on handlebars 5 2.5 - 4
Hole covering 0.3 – 0.5
Brake lever unit Mount on handlebars 6 - 8 5 - 7 6 - 8
Time trial brake lever 5 - 7
Hub Quick-release lever 5 – 7.5
Locknut for bearing adjustment of quick-release hubs 10 - 25
Sprocket cluster lock ring 29 - 49 40
Internal gear hub Hub axle nut 30 - 45
Crank Crank mount (grease-free square-head) 35 - 50
Crank mount (Shimano Octalink) 35 - 50
Crank mount (Shimano Hollowtech II) 12 - 15
Crank mount (Isis) 31 - 34
Crank mount (Giga X Pipe) 48 - 54
Chainwheel mount 8 - 11 12 - 14 (steel) 8 - 9 (alu)
Sealed cartridge bearing Shell (square-head) 49 - 69
Shell (Shimano Hollowtech II, SRAM Giga X Pipe) 35 - 50 34 - 41
Octalink 50 - 70