Mercury VesselView 7, Руководство пользователя

Страница: 51 / 61

Section 5 - Screen Navigation
90-8M0074777
eng
MAY 2013 Page 47
• Use the X to hide autopilot data and display the autopilot mode in the system tray icon. This allows other information to be
displayed in the contextual area.
a - Pages
b - Minimizes autopilot data
Minimized Autopilot
When X is selected from the contextual data navigation, autopilot data will be removed. You can select to display limited items
from the scroller bar in the contextual data area. The last contextual data will be displayed by default.
•
Scroller bar selection limited to: Expand, ECO, Fuel Management, Trip Log, Voltage, Navigation, Pressure, Temperature,
Tanks, Cruise, Genset, and Settings.
NOTE: Available scroller bar items available are based on the gauge and vessel personality.
• When ECO is active and autopilot is minimized, the system tray will display AUTO in the system tray icon.
• Items in the scroller bar that cannot be selected will be gray when autopilot is active.
• When an autopilot popup occurs, or a button is pressed on the autopilot CAN pad, autopilot data will automatically fill the
contextual data area. You must select X to hide the data.
• The system tray will display what active mode autopilot is in: track, auto, waypoint sequence or standby. Waypoint
sequence will be displayed on a field of orange in the system tray; all other modes will be on a field of gray.
Warnings
Popup Warnings
All Mercury warning alarms will be shown regardless of what screen is displayed at the time of the warning. When an alarm
warning is activated, the status box will display the warning text and icon. Faults, along with their descriptive short text, long
text, and action text, will be displayed full screen.
•
When a fault occurs:
a. The status box will turn red and show the warning text and Icon.
52101
b. Fuel and depth warning faults will have additional options and will be described in
Fuel Critical Alarm and Depth
Alarm
.
c. A level 3 popup warning (trim, navigation, ECO, fuel) can be turned off or on by the operator in the Settings menu. By
default it is turned on. If the popup warning is turned off in the Settings menu, the faults will only show in the system
tray.
d. All Guardian faults (level 4) will always be displayed regardless of what is selected in the Settings menu.
e. If the fault is related to emissions control, the engine icon will be displayed in the status box.
• When the operator selects a fault in the contextual area:
a. The fault title with the warning icon will be displayed at the top.
b. Short text fault description and the fault location (engine) will be displayed below the title.
a
b
52461