Mercury VesselView 7, Руководство пользователя

Страница: 50 / 61

Section 5 - Screen Navigation
Page 46 90-8M0074777
eng
MAY 2013
b. Troll status enabled or disable.
a - Set‑point value
b - Enabled or disable
c - Minimize
d - Exit
Troll Navigation
Troll mode will have a modified navigation system similar to Smart Tow. The footer section of the contextual panel allows the
operator to enable or disable troll, minimize, or exit the program element. Footer navigation will follow the same basic
navigation selection strategy as other features.
1. Press on the selection in the footer.
2. Press the enter button to activate the selection.
a. Enable or disable the element feature
b. Minimize will hide troll data and display TROLL in the system tray. This allows the operator to display information from
other selected icons.
3. The set‑point adjustment selection field will be the default location at troll start‑up. After the operator makes adjustments to
the desired settings, press on the enable/disable selection in the footer area of the contextual data area.
a. Use the touch screen to move between the set‑point selection and the footer.
b. When the selection box is outside the footer navigation area (set‑point field), the operator only needs to change the
RPM or speed numbers. There is no need to press enter to engage the new setting.
4. Minimize is a feature that allows the operator to use the troll feature while displaying additional data in the contextual data
area.
IMPORTANT: Set‑points cannot be adjusted when troll is minimized.
a. Scroller bar icon selection is limited. Items that are not accessible will be grayed out when troll is active.
b. If autopilot is active, and troll is minimized, the system tray will display TROLL in the system tray.
• Troll data will be displayed over autopilot settings if the user selects the system Tray
• If an autopilot popup warning occurs or the operator uses the autopilot CAN track pad, autopilot contextual data
will automatically fill the contextual data area. The operator will have to minimize to hide the popup data.
5. After minimize is activated, the system tray will display TROLL.
6. When exit is selected while displaying troll element and the operator presses enter, the troll feature will be disabled. The
troll icon will be displayed next to the system tray until another icon is selected from the scroller bar.
Autopilot Screens
Autopilot Screens Overview
VesselView is a display extension for autopilot features and joystick operations. All functionality of these piloting features are
controlled through the Mercury Marine autopilot control area network (CAN) pad. VesselView will show if the mode is active or
in standby; popups will appear as the vessel arrives at a waypoint asking to acknowledge the turn, and display information on
how to adjust the engine and drives to achieve maximum efficiency.
•
Pressing any button on the autopilot CAN track pad, will cause VesselView to default to displaying the autopilot screen.
• Autopilot will be actively displayed when this feature is turned on. All modes and functions are controlled with the CAN pad.
Autopilot Screens Navigation
Autopilot screens will have a modified navigation system. Information will be displayed on two pages of contextual data. Page
indicators and X will be the only selections available.
•
Page 1 will contain base autopilot information.
• Page 2 will contain additional navigation data.
52457
a
b
c
d