Page i
Notice to Users of This Manual
Throughout this publication, dangers, warnings, cautions, and notices (accompanied by
the International HAZARD Symbol
!
) are used to alert the mechanic to special
instructions concerning a particular service or operation that may be hazardous if
performed incorrectly or carelessly. These safety alerts follow ANSI standard Z535.6‑2006
for product safety information in product manuals, instructions, and other collateral
materials.
Observe them carefully!
These safety alerts alone cannot eliminate the hazards that they signal. Strict compliance
to these special instructions when performing the service, plus common sense operation,
are major accident prevention measures.
!
DANGER
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
!
WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious
injury.
!
CAUTION
Indicates a hazardous situation which, if not avoided, could result in minor or moderate
injury.
NOTICE
Indicates a situation which, if not avoided, could result in engine or major component
failure.
IMPORTANT: Identifies information essential to the successful completion of the task.
NOTE: Indicates information that helps in the understanding of a particular step or action.
This manual has been written and published by the Service Department of Mercury Marine
to aid our dealers’ mechanics and company service personnel when servicing the products
described herein. We reserve the right to make changes to this manual without prior
notification.
© 2006, Mercury Marine
Mercury, Mercury Marine, MerCruiser, Mercury MerCruiser, Mercury Racing, Mercury
Precision Parts, Mercury Propellers, Mariner, Quicksilver, #1 On The Water, Alpha, Bravo,
Pro Max, OptiMax, Sport‑Jet, K‑Planes, MerCathode, RideGuide, SmartCraft, Zero Effort,
M with Waves logo, Mercury with Waves logo, and SmartCraft logo are all registered
trademarks of Brunswick Corporation. Mercury Product Protection logo is a registered
service mark of Brunswick Corporation.
It is assumed that these personnel are familiar with marine product servicing procedures.
Furthermore, it is assumed that they have been trained in the recommended service
procedures of Mercury Marine Power Products, including the use of mechanics’ common
hand tools and the special Mercury Marine or recommended tools from other suppliers.
We could not possibly know of and advise the marine trade of all conceivable procedures
and of the possible hazards and/or results of each method. Therefore, anyone who uses
a service procedure and/or tool, which is not recommended by the manufacturer, first must
completely satisfy himself that neither his nor the products safety will be endangered.
Содержание MerCruiser ECM 555
Страница 5: ...Page iv...
