Mercury jet 20 Скачать руководство пользователя страница 1

Страница: 1 / 57

Welcome Aboard!

Proper care and maintenance is an important part in keeping your Mercury Product operating at peak

efficiency for maximum performance and economy. The enclosed Owner's Registration Card is your key

to trouble‑free family fun. Refer to your Operation and Maintenance Manual for full details of your warranty

coverage.
Details of your nearest dealer can be found on www.marinepower.com where country maps and full

contact information are displayed.
Is your engine properly registered for warranty purpose? Please check on www.marinepower.com. If

necessary, please contact your local dealer.

Declaration of Conformity

If the outboard motor’s serial number plate contains the CE mark in the lower left‑hand corner, the

following statement applies:
This outboard motor manufactured by Mercury Marine, Fond du Lac, WI, USA or Marine Power Europe

Inc. Park Industriel, de Petit‑Rechain, Belgium complies with the requirements of the following directives

and standards, as amended:

Recreational Craft Directive:

94/25/EC

Owner's manual (A.2.5)

ISO 10240

Handling characteristics (A.4)

ISO 8665

Outboard engine starting (A.5.1.4)

ISO 11547

Fuel tanks (A.5.2.2)

ISO 13591; ISO 8469

General steering system

ABYC P‑17

Safety of Machinery Directive

98/37/EC

Principles of safety integration (1.1.2)

EN 292‑1; EN 292‑2; EN 1050

Noise (1.5.8)

ICOMIA 39/94

Vibration

ICOMIA 38/94

Electromagnetic Compatibility Directive

89/336/EC

Generic emission standard

EN 61000‑6‑3

Generic immunity standard

EN 61000‑6‑1

Vehicles, boats and internal combustion

engine driven devices ‑ radio disturbance

characteristics

SAE J551 (CISPR 12)

Electrostatic discharge testing

EN 61000‑6‑2; EN 61000‑4‑2; EN

61000‑4‑3

This declaration is issued under the sole responsibility of Mercury Marine and Marine Power Europe.

Jet 20

90-10132060 505

Содержание jet 20


























































Результаты поиска

Содержание jet 20

Отзывы:

Похожие инструкции для jet 20

Бренды по названию

Популярные бренды

Mercury jet 20, Руководство пользователя

Результаты поиска

Содержание jet 20

Отзывы:

Похожие инструкции для jet 20

Бренды по названию

Популярные бренды