Mercury jet 20 Скачать руководство пользователя страница 48

Страница: 48 / 57

MAINTENANCE

ob01411

Description

lb. in.

lb. ft.

Water intake housing mounting bolts

120

Shift Link Rod Adjustment

WARNING

The shift link rod must be adjusted to lock the reverse gate against unexpected engagement (caused by water

pressure hitting the gate) while operating the boat in forward. Activation of the reverse gate will cause sudden

unexpected stopping of the boat. Sudden stopping may cause occupants to be thrown within the boat or even

out of the boat. This action may result in serious injury or death.

CHECKING SHIFT LINK ROD ADJUSTMENT

Check the shift link rod adjustment in forward shift position. The correct adjustment will position the shift cam

far enough on the roller in order to lock the reverse gate into forward position. The reverse gate should not be

able to be forced up towards neutral. Pull on the reverse gate by hand to verify.

ob01415

a -

Shift link rod

b -

Shift cam

c -

Roller

d -

Reverse gate

ADJUSTING SHIFT LINK ROD

Place the shift handle into full forward shift position.

Содержание jet 20


























































Результаты поиска

Содержание jet 20

Отзывы:

Похожие инструкции для jet 20

Бренды по названию

Популярные бренды

Mercury jet 20, Руководство пользователя

Результаты поиска

Содержание jet 20

Отзывы:

Похожие инструкции для jet 20

Бренды по названию

Популярные бренды