manualshive.com logo in svg

Mercury HP 500 EFI Bravo XR/XZ/III, Руководство пользователя, Страница: 53 / 148

Поделиться
Скачать
Mercury HP 500 EFI Bravo XR/XZ/III Скачать руководство пользователя страница 53

 49

500 EFI Bravo

OPERATION

CB184

Remote Controls (Console Mounted)

1

Control Handle(s) - Operation of the shift and throttle are con-
trolled by the movement of the control handle. “Push” the control
handle forward from “Neutral” with a quick firm motion to the first
detent for “Forward” gear. Continue pushing forward to increase
speed. Pull the control handle back from “Neutral” with a quick
firm motion to the first detent for “Reverse” gear. Continue pulling
back to increase speed.

2

Throttle Only Button - Allows engine throttle advancement
without shifting the engine. This is done by disengaging the shift
mechanism from the control handle. The throttle only button can
be depressed only when the remote control handle is in the “Neu-
tral” position, and should only be used to assist in starting the
engine.

3

Control Handle Tension Adjustment Screw - This screw can
be adjusted to “Increase” or “Decrease” the tension on the control
handle (cover must be removed to adjust). This will help prevent
“Creep” of the remote control handle. Turn screw “Clockwise” to
increase tension and “Counterclockwise” to decrease tension.
Adjust to tension desired.

4

Power Trim Switch - See “Power Trim” section for detailed
power trim operating procedures.

5

Trailer Switch - (Not used with Bravo Heavy Duty Transoms)
See “Power Trim” for detailed trailer switch operation.

6

Power Trim Adjustment Switch’s (Used on Three Button
Trim Control Only) - See “Power Trim” section for detailed
power trim operating procedures.

Содержание HP 500 EFI Bravo XR/XZ/III





















































































































































Отзывы:

Нет отзывов