manualshive.com logo in svg

Mercury HP 500 EFI Bravo XR/XZ/III, Руководство пользователя, Страница: 122 / 148

Поделиться
Скачать
Mercury HP 500 EFI Bravo XR/XZ/III Скачать руководство пользователя страница 122

 118

500 EFI Bravo

 MAINTENANCE

Battery

All lead acid batteries discharge when not in use. Recharge every 30
to 45 days, or when specific gravity drops below battery manufactur-
er’s specifications.

Refer to specific instructions and warnings accompanying your bat-
tery. If this information is not available, observe the following:

WARNING

Observe the following when jump starting, charging or
handling a battery:

•

Do not use jumper cables and a booster battery to start
engine.

•

When charging batteries, be sure battery compartment or
area where batteries are located, is well-vented.

•

Do not recharge a weak battery in the boat.

•

Remove battery and recharge in a ventilated area away
from fuel vapors, sparks or flames.

•

Hydrogen gases that escape from the battery during charg-
ing are explosive.

•

Batteries contain acid which can cause severe burns -
Avoid contact with skin, eyes and clothing.

•

Batteries produce hydrogen and oxygen gases when being
charged.

•

This explosive gas escapes fill/vent cell caps and may form
an explosive atmosphere around the battery for several
hours after it has been charged.

•

Sparks or flames can ignite the gas and cause an explosion
which may shatter the battery and could cause blindness
or other serious injury.

Battery Handling:

•

Safety glasses and rubber gloves are recommended when
handling or filling a battery.

•

Battery electrolyte is a corrosive acid and should be han-
dled with care.

•

If electrolyte is spilled or splashed on any part of the body,
immediately flush the exposed area with liberal amounts of
water and obtain medical aid as soon as possible.

Содержание HP 500 EFI Bravo XR/XZ/III





















































































































































Отзывы:

Нет отзывов