manualshive.com logo in svg

Mercury HP 500 EFI Bravo XR/XZ/III, Руководство пользователя, Страница: 18 / 148

Поделиться
Скачать
Mercury HP 500 EFI Bravo XR/XZ/III Скачать руководство пользователя страница 18

 14

500 EFI Bravo

WARRANTY INFORMATION

3 Year Limited Warranty Against Corrosion
(Worldwide) (cont.)

Corrosion damage caused by stray electrical currents (on-shore
power connections, nearby boats, submerged metal) is not covered
by this corrosion warranty and should be protected against by the
use of a corrosion protection system, such as the Mercury Precision
Parts or Quicksilver MerCathode system and/or Galvanic Isolator.
Corrosion damage caused by improper application of copper base
anti-fouling paints is also not covered by this limited warranty. If anti-
fouling protection is required, Tri-Butyl-Tin-Adipate (TBTA) base
anti-fouling paints are recommended on Outboard and MerCruiser
boating applications. In areas where TBTA base paints are prohib-
ited by law, copper base paints can be used on the hull and transom.
Do not apply paint to the outboard or MerCruiser product. In addition,
care must be taken to avoid an electrical interconnection between
the warranted product and the paint. For MerCruiser product, an un-
painted gap of at least 1.5 inches (38 mm) should be left around the
transom assembly. Refer to the Operation, Maintenance & Warranty
Manual for additional details.

For additional information regarding events and circumstances cov-
ered by this warranty, and those that are not, see the Warranty Cov-
erage section of the Operation, Maintenance & Warranty Manual, in-
corporated by reference into this warranty.

DISCLAIMERS AND LIMITATIONS

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY DIS-
CLAIMED. TO THE EXTENT THAT THEY CANNOT BE DIS-
CLAIMED, THE IMPLIED WARRANTIES ARE LIMITED IN
DURATION TO THE LIFE OF THE EXPRESS WARRANTY. INCI-
DENTAL AND CONSEQUENTIAL DAMAGES ARE EXCLUDED
FROM COVERAGE UNDER THIS WARRANTY. SOME STATES/
COUNTRIES DO NOT ALLOW FOR THE DISCLAIMERS, LI-
MITATIONS AND EXCLUSIONS IDENTIFIED ABOVE, AS A RE-
SULT, THEY MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER LEGAL RIGHTS WHICH VARY FROM STATE TO
STATE AND COUNTRY TO COUNTRY.

Содержание HP 500 EFI Bravo XR/XZ/III





















































































































































Отзывы:

Нет отзывов