Mercury Epiphone Valve Junior Скачать руководство пользователя страница 2

Страница: 2 / 47

Epiphone Valve Jr.

•

Mercury Upgrade Kit

This project and its documentation is the result of technical investigations made by the engineering staff of

Mercury Magnetics

. The disclosure of the information herein may pertain to proprietary rights and

the furnishing of these documents does not constitute an expresed or implied license to use such materials.

If you do not know how to read a schematic, we strongly recommend

that you take this project to a qualified technician for installation.

All

Mercury Magnetics

products are 100% handmade by us in California, USA.

Mercury Magnetics

, Multi-Choke, Mini-Choke

and “The Heart & Soul of Your Amp” slogan are trademarks licenced to

Mercury Magnetics

. Axiom, APS and ToneClone are

registered trademarks licensed to

Mercury Magnetics

. Epiphone and Valve Jr. are trademarks of Gibson Guitar Corp.

Mercury

Magnetics

is not affiliated with with Gibson Guitar Corp. This project and its documentation is the result of technical investigations

made by the engineering staff of

Mercury Magnetics

. The disclosure of the information herein may pertain to proprietary rights

and the furnishing of these documents does not constitute an expresed or implied license to use such materials.

Mercury Magnetics

products are UL (Underwriters Laboratories Inc.) recognized components for the USA and Canada. OBJY2

component systems, electrical insulation, E120568. UL Recognition, class 130(b) – Class 200(n). OBJY8 component systems,

electrical insulation, certified for Canada, class 130(b) – Class 200(n).

Mercury Magnetics

transformers and other products are in compliance with the European Union RoHS Directive 2020/95/EC with

respect to the following substances: lead (Pb), mercury (Hg), cadmium (Cd, hexavalent chromium (CR (VI)), polybrominated biphenyls

(PBB), and polybrominated diphenyl ethers (PBDE).

Attention: Modifying your Epiphone Valve Jr. amp voids the factory warranty!

Circuitry modifications and design by

Sergio Hamernik and Alan Cyr

Manual written and designed by

Paul H. Smith

9167 Independence Ave.

Chatsworth, CA 91311

(818) 998-7791 • FAX: (818) 998-7835

Skype

: paul.patronete or patrick.selfridge

www.

MercuryMagnetics

.com

[email protected]

This manual is for the Valve Jr.

PCB VERSION 2 or 3 ONLY!

(Please see the identification notes in this

manual to determine which version you have.)

Содержание Epiphone Valve Junior
















































Результаты поиска

Содержание Epiphone Valve Junior

Отзывы:

Бренды по названию

Популярные бренды

Mercury Epiphone Valve Junior, Инструкция по сборке

Результаты поиска

Содержание Epiphone Valve Junior

Отзывы:

Бренды по названию

Популярные бренды