DTS DUAL CONSOLE REMOTE CONTROL WITH CAN TRACKPAD
Page 6 / 17
90-889224 MAY 2006
10. Install the side cover with attaching screws.
a
b
N E U T R
A L
+
-
TROLL
TRANSFER
SYNC
THROTTLE
ONLY
DOCK
1 LEVER
22129
a -
Side cover (2)
b -
Attaching screws (4) M4 x 20
Dual Console Control with CAN Trackpad Features and Operation
Dual Handle Console Control with CAN Trackpad Features and Operation
1. Operation of shift and throttle is controlled by the movement of the control handle.
Push the control handle forward from neutral to the first detent for forward gear.
Continue pushing the handle forward to increase speed. Pull the control handle back
from neutral to the first detent for reverse gear. Continue pulling the handle back to
increase speed.
F
N
R
3417
2. Trim switch (if equipped) - Pressing the trim switch allows the engine to trim up and
down.
N E
U T
R A
L
SYNC
THROTTLE
ONLY
+
-
TROLL
TRANSFER
DOCK
1 LEVER
22132
3. Neutral lights - The neutral lights illuminate when the engine is in neutral gear position.
The lights will flash when the engine is in throttle only mode.
NOTE: Gear position is determined by the position of the shift actuator on the engine,
not the position of the control handle.
