DTS DUAL CONSOLE REMOTE CONTROL WITH CAN TRACKPAD
Page 12 / 17
90-889224 MAY 2006
4. All the CAN trackpads connected to the system should start flashing. Verify they are
all flashing and press the "Yes" button. If any trackpads are not flashing, press the
"No" button.
5. Go to helm 1 and press a throttle only button on a flashing trackpad. The trackpad
will stop flashing. Press the "Next" button to save the trackpad location.
6. The CDS will repeat these steps for the number of trackpads selected on helm 1. All
remaining trackpads at helm 1 will flash until calibrated.
7. When all trackpads at helm 1 have been calibrated, the CDS will repeat the calibration
for each remaining helm. When all trackpads have been calibrated, turn all key
switches to the "OFF" position and press the "Next" button.
8. CAN trackpad calibration is now complete. Press the "Finished" button.
9. The city ID, helm, and quantity for each CAN trackpad will appear on the screen.
Verify there is one CAN trackpad for each city ID. If multiple trackpads are assigned
to a city ID, the CAN trackpads must be re-calibrated.
