Mercury 71712, Руководство по эксплуатации

Страница: 10 / 30

Single‑Handle Console ERC
Single‑handle console ERCs control a single engine. There are several variations, but only one of these can be used with
electric steering (ES).
71966
a
b
c
d
e
g
h
f
i
Ref Control/LED Function
a Neutral (
N
) LED
Illuminates when the engine is in the neutral gear position. The light flashes when the
engine is in throttle‑only mode.
b Brightness (
+
and
–
)
Increases and decreases the brightness settings for the lights on the ERC and Mercury
helm components.
c
TRANSFER
Allows boat control to be transferred to a different helm. (The LED will be ON at the active
helm.) Refer to
Helm Transfer
.
d
THROTTLE ONLY
Allows the boat operator to increase engine RPM without shifting into gear. Refer to
Throttle
‑
Only Mode
.
e
QUICK STEER
(if equipped) Decreases the number of steering helm turns, lock‑to‑lock, for quicker response during
docking. This feature also limits engine speed. Refer to
Quick Steer
.
f
ACTIVE TRIM
(if equipped) The
ACTIVE TRIM
button turns the Active Trim feature
ON
or
OFF
. Refer to
Active Trim
.
Profile
▲
and
▼
Changes the selected Active Trim profile.
Active Trim LEDs (
1, 2, 3, 4,
5
)
Indicates the currently selected Active Trim profile.
NOTE: If the LED indicators are flashing, Active Trim is in setup mode.
g
START/STOP ENGINE
Starts or stops the engine.
h
UP ▲
and
DN ▼
—trim
control
Raises and lowers the engine/drive for best efficiency, or for conditions such as shallow
water or trailering. Some boats are equipped with separately‑mounted trim controls.
i Mechanical lock bar
Pressing the mechanical lock bar allows the engine to shift. The mechanical lock bar
must always be pressed when moving the control handle out of the neutral position.
Dual‑Handle Console ERC
Dual‑handle console ERCs control two, three, four, five, or six‑engines. Dual‑engine ERCs are available with or without integral
trim switches.
Section 1 - DTS Controls and Features
90-8M0180922
eng
MAY 2021 Page 5