Mercury 2003 Marauder Скачать руководство пользователя страница 76

Страница: 76 / 233

KEYS

The key operates all locks on your vehicle. In case of loss, replacement
keys are available from your dealer.

You should always carry a second key with you in a safe place in case
you require it in an emergency.

Refer to

SecuriLock

Passive Anti-Theft System

for more information.

POWER DOOR LOCKS

Press control to unlock all doors.

Note:

When Perimeter Alarm is

armed, this switch is disabled.

Press control to lock all doors.

Smart locks

With the key in any ignition position, and either the driver’s or
passenger’s door open, the doors cannot be locked using the power door
lock switches.

The vehicle may still be locked with the key in the ignition, and
performing one of the following actions:

•

Pressing the manual lock button on the door.

•

Operating the remote entry transmitter.

•

Operating the keyless entry keypad.

•

Operating the driver’s door with a key.

Locks and Security

Содержание 2003 Marauder










































































































































































































































Результаты поиска

Содержание 2003 Marauder

Отзывы:

Похожие инструкции для 2003 Marauder

Бренды по названию

Популярные бренды

Mercury 2003 Marauder, Руководство пользователя

Результаты поиска

Содержание 2003 Marauder

Отзывы:

Похожие инструкции для 2003 Marauder

Бренды по названию

Популярные бренды