Mercury 2003 Marauder Скачать руководство пользователя страница 184

Страница: 184 / 233

5. Locate and carefully remove the
engine oil level indicator (dipstick).

6. Wipe the indicator clean. Insert the indicator fully, then remove it again.

•

If the oil level is

between the MIN and MAX marks,

the oil level is

acceptable.

DO NOT ADD OIL.

•

If the oil level is below the MIN
mark, add enough oil to raise the
level within the MIN-MAX range.

•

Oil levels above the MAX mark may cause engine damage. Some oil
must be removed from the engine by a service technician.

7. Put the indicator back in and ensure it is fully seated.

Maintenance and Specifications

183

Содержание 2003 Marauder










































































































































































































































Результаты поиска

Содержание 2003 Marauder

Отзывы:

Похожие инструкции для 2003 Marauder

Бренды по названию

Популярные бренды

Mercury 2003 Marauder, Руководство пользователя

Результаты поиска

Содержание 2003 Marauder

Отзывы:

Похожие инструкции для 2003 Marauder

Бренды по названию

Популярные бренды