Mercury 2003 Marauder Скачать руководство пользователя страница 64

Страница: 64 / 233

POWER ADJUSTABLE FOOT PEDALS

The accelerator and brake pedal
should only be adjusted when the
vehicle is stopped and the gearshift
lever is in the P(Park) position.

Press and hold the rocker control to
adjust accelerator and brake pedal.

•

Press the left side of the control to adjust the pedals toward you.

•

Press the right side of the control to adjust the pedals away from you.

The adjustment allows for approximately 65 mm (2.5 inches) of
maximum travel.

Never adjust the accelerator and brake pedal with feet on the
pedals while the vehicle is moving.

SPEED CONTROL

To turn speed control on

•

Press ON.

Vehicle speed cannot be controlled
until the vehicle is traveling at or
above 48 km/h (30 mph).

Do not shift the gearshift lever
into N (Neutral) with the speed
control on.

Do not use the speed control in heavy traffic or on roads that
are winding, slippery, or unpaved.

Driver Controls

Содержание 2003 Marauder










































































































































































































































Результаты поиска

Содержание 2003 Marauder

Отзывы:

Похожие инструкции для 2003 Marauder

Бренды по названию

Популярные бренды

Mercury 2003 Marauder, Руководство пользователя

Результаты поиска

Содержание 2003 Marauder

Отзывы:

Похожие инструкции для 2003 Marauder

Бренды по названию

Популярные бренды