background image

WARRANTY INFORMATION

12

U.S. EPA Emissions Limited Warranty

Consistent with the obligations created by 40 CFR Part 1045,

Subpart B, Mercury Marine provides a five year or 175 hours of

engine use, whichever occurs first, to the retail customer, that the

engine is designed, built, and equipped so as to conform at the

time of sale with applicable regulations under section 213 of the

Clean Air Act, and that the engine is free from defects in materials

and workmanship which cause the engine to fail to conform with

applicable regulations. This emission‑related warranty covers all

the components listed in the 

Emission Control System

Components

.

Emission Control System Components

The EPA and Califormia emission‑related warranty covers all the

following list of components:

COMPONENTS OF THE EMISSIONS CONTROL SYSTEM:

1. Fuel metering system

a. Carburetor and internal parts (and/or pressure regulator or

fuel injection system)

b. Cold start enrichment system
c. Intake valves

2. Air induction system

a. Intake manifold
b. Turbocharger or supercharger systems (where applicable)

3. Ignition system

a. Spark plugs
b. Magneto or electronic ignition system
c. Spark advance/retard system
d. Ignition coil and/or control module
e. Ignition wires

4. Lubrication system (4‑Stroke engines excluded)

a. Oil pump and internal parts
b. Oil injectors
c. Oil meter

5. Exhaust system

Содержание 200 Sport-Jet





















































































Отзывы: