Mercury 1.7 MI Скачать руководство пользователя

Страница: 128 / 248

CD749

Read This Manual Thoroughly

IF YOU DON’T UNDERSTAND ANY PORTION, CONTACT YOUR DEALER FOR A

DEMONSTRATION OF ACTUAL STARTING AND OPERATING PROCEDURES.

NOTICE

Throughout this publication, and on your power package,

WARNINGS

and

CAUTIONS

accompanied by the International Hazard Symbol

, may be used to alert the installer/user

to special instructions concerning a particular service or operation that may be hazardous if

performed incorrectly or carelessly.

Observe them carefully.

These Safety Alerts alone cannot eliminate the hazards that they signal. Strict compliance

with these special instructions while performing the service, plus common sense operation,

are major accident prevention measures.

WARNING

WARNING - Hazards or unsafe practices which could result in severe personal injury

or death.

CAUTION

CAUTION - Hazards or unsafe practices which could result in minor personal injury

or product or property damage.

IMPORTANT: - Indicates information or instructions that are necessary for proper

operation and/or maintenance.

CE458

WARNING

The operator (driver) is responsible for the correct and safe operation of the boat, the

equipment aboard and the safety of all occupants aboard. We strongly recommend

that the operator read this Operation, Maintenance and Warranty Manual and

thoroughly understand the operational instructions for the power package and all

related accessories before the boat is used.

WARNING

California Proposition 65 Warning

The engine exhaust from this product contains chemicals known to the state of

California to cause cancer, birth defects or other reproductive harm.

WARNING

Electrical system components on this engine are not external ignition protected. DO

NOT STORE OR UTILIZE GASOLINE ON BOATS EQUIPPED WITH THESE ENGINES,

UNLESS PROVISIONS HAVE BEEN MADE TO EXCLUDE GASOLINE VAPORS FROM

ENGINE COMPARTMENT (REF: 33 CFR). Failure to comply could result in fire, explo-

sion and/or severe personal injury.

INDEX

Содержание 1.7 MI

























































































































































































































































Результаты поиска

Содержание 1.7 MI

Отзывы:

Похожие инструкции для 1.7 MI

Бренды по названию

Популярные бренды

Mercury 1.7 MI, Руководство пользователя

Результаты поиска

Содержание 1.7 MI

Отзывы:

Похожие инструкции для 1.7 MI

Бренды по названию

Популярные бренды