Mercury 1.7 MI Скачать руководство пользователя

Страница: 95 / 248

MAINTENANCE

SECTION 5

CMD-3967823 / 90-865237030 OCTOBER 2003

Page 87

4. Place the remote control in NEUTRAL, IDLE speed position and start the engine.

CAUTION

Do not run engine above 1500 rpm when flushing. Suction created by seawater

pickup pump may collapse flushing hose, causing engine to overheat.

5. Operate the engine at idle speed, in NEUTRAL, for about 10 minutes, or until discharge

water is clear.

6. Stop the engine.
7. Shut off the water tap.
8. Remove the adapter from the seawater pump inlet hose connection and reconnect the

seawater inlet hose. Tighten the hose clamps securely.

79464

a -

Adapter

b -

Seawater pump inlet hose

CAUTION

If boat is in the water, seacock must remain closed until engine is to be re-started

to prevent water from flowing back into cooling system and/or boat. If boat is not

fitted with a seacock, water inlet hose must remain disconnected and plugged to

prevent water from flowing back into cooling system and/or boat. As a

precautionary measure, attach a tag to the ignition switch or steering wheel of the

boat with the warning: Open seacock or reconnect water inlet hose before starting

engine.

NOTE:

The closed cooling section of cooling system that contains coolant does not need

to be flushed. Coolant is changed at specified intervals. Refer to Maintenance Schedules.

INDEX

Содержание 1.7 MI

























































































































































































































































Результаты поиска

Содержание 1.7 MI

Отзывы:

Похожие инструкции для 1.7 MI

Бренды по названию

Популярные бренды

Mercury 1.7 MI, Руководство пользователя

Результаты поиска

Содержание 1.7 MI

Отзывы:

Похожие инструкции для 1.7 MI

Бренды по названию

Популярные бренды