manualshive.com logo in svg

MerCs Strider M73, Руководство пользователя

Поделиться
Скачать
MerCs Strider M73 Скачать руководство пользователя страница 17

02 4047 0777

www.mercs.com.au

02 4047 0788

MerCs Pty Ltd, 55 Pendlebury Rd, Cardiff, NSW, 2285, Australia | 2018 V1.1

17

Multifunction Power Analyser 

MerCs Strider M73

• 

Sliding time

• 

Backlight time

• 

Display scroll time

Image

This option sets the backlight lasting time and display scroll time. 

From the Set-up menu, Use            and           to select the Time option.

Image

The meter provides a function to set the backlit lasting time.

Options: ON/OFF/5/10/30/60/120 minutes. Default: 60

If it is seated as 5, the backlit will be off in 5 minutes.

Note: if it is set as ON, the backlit will always be on.

Long press           to enter the Backlit time routine. Press           for 2s, the  setting will flash. Use            and

            to choose Options.  And long press           for confirmation.

Image

The meter provides a function to set the Display scroll time.

Options: 1~255s

Default: 5

If it is seated as 5, the display will scroll every 5s.

Use           and          to select Display scroll time option. Press          for 2s, the setting will flash. Use 

         and          to choose Options.  And Long press          for confirmation. Press          to return the 

Time set up menu.

Time

Image

This option sets the backlight lasting time and display scroll time.

From the Set-up menu, Use           and           to select the Time option.

Содержание Strider M73































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды