manualshive.com logo in svg

MerCs Strider M73, Руководство пользователя

Поделиться
Скачать
MerCs Strider M73 Скачать руководство пользователя страница 13

02 4047 0777

www.mercs.com.au

02 4047 0788

MerCs Pty Ltd, 55 Pendlebury Rd, Cardiff, NSW, 2285, Australia | 2018 V1.1

13

Multifunction Power Analyser 

MerCs Strider M73

Image

Stop Bit options: 1 or 2.

Default Stop Bit : 1

Note that if parity is set to ODD or EVEN, Stop Bits will be set to 1 and cannot be changed.

From the Set-up menu, Use           and           to select the  Stop Bit options.

Long press          to enter the Stop Bit routine. The Stop Bit setting will flash. Use           and           to 

choose Stop Bit.

Example shows
Set Stop bit 2

And long press            for confirmation. Press           to return the Communication set up menu.

• 

Parity

Image

Parity Options: NONE, EVEN, ODD.

Default Parity : NONE

Note that if parity is set to ODD or EVEN, Stop Bits will be set to 1 and cannot be changed.

From the Set-up menu, Use           and          to select the Parity options.

Long press          to enter the selection routine. The Parity setting will flash. Use         and          to 

choose Parity.

Example shows:
Set Parity: EVEN

And long press           for confirmation. Press           to return the main set up menu.

Example shows:
Set Parity: Odd

And long press            for confirmation. Press           to return the main set up menu

• 

Stop bit

Содержание Strider M73































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды