02 4047 0777
www.mercs.com.au
02 4047 0788
18
Strider M4 V2
ME-PM-M4-5
MerCs Pty Ltd, 55 Pendlebury Rd, Cardiff, NSW, 2285, Australia | 2019 V1.1
Measured Inputs
Voltage inputs through 4-way fixed connector with 2.5mm² stranded wire capacity.single phase two wire(1p2w), three phase three wire(3p3w) or
three phase four wire(3p4w) unbalanced. Line frequency measured from L1 voltage or L3 voltage.
Three current inputs (six physical terminals) with 2.5mm² stranded wire capacity for connection of external CTs. Nominal rated input current 5A or
1A a.c. Rms.
Power factor and Frequency and Max. Demand
Energy Measurements
•
Frequency in Hz
•
Instantaneous power:
•
Power 0 to 3600 MW
•
Reactive Power 0 to 3600
•
MVAr
•
Volt
•
Volt-amps 0 to 3600 MVA
•
Maximum demanded power since last Demand reset Power factor
•
Maximum neutral demand current, since the last Demand reset
( for three phase supplies only)
Accuracy
Imported/Exported active energy
0 to 9999999.9 kWh
Imported Exported reactive energy
0 to 9999999.9 kVArh
Total active energy
0 to 9999999.9 kWh
Total reactive energy
9999999.9 kVArh
Voltage
0.5% of range maximum
Current
0.5% of nominal
Frequency
0.2% of mid-frequency
Power factor
1% of unity (0.01)
Active power (W)
±1% of range maximum
Reactive power (VAr)
±1% of range maximum
Apparent power (VA)
±1% of range maximum
Active energy (Wh)
Class 0.5S IEC 62053-21
Reactive energy (VArh)
±1% of range maximum
Total harmonic distortion
1% up to 31st harmonic
Response time to step input
1s, typical, to >99% of final reading,
at 50 Hz
Auxiliary Supply
Two-way fixed connector with 2·5mm2 stranded wire capacity. 85 to 275V a.c. 50/60Hz ±10% or 120V to 380V d.c. ±20%. Consumption < 10W.
