Chapter 1 Introduction
The 3100 Smart Pressure Transmitter is calibrated at the factory
before shipping. To ensure correct and efficient use of the
instrument, please read the manual thoroughly and fully understand
how to operate the instrument before operation.
1. The contents of this manual are subject to change without prior
notice.
2. All rights are reserved. No part of this manual may be reproduced
in any form without Dwyer Instruments, Inc. written permission.
3. If any question arises, errors are found or if any information is
missing from this manual, please inform Dwyer Instruments, Inc.
4. The specifications covered by this manual are limited to standard
transmitters and do not cover custom-made instrument.
5. Please note that changes in the specifications, construction, or
component parts of the instrument may not immediately be
reflected in this manual at the time of change, provided that
postponement of revisions will not cause difficulty to the user
from a functional or performance standpoint.
1.1 Using This Manual
The operating manual provides information on installing, operating,
and maintaining the Mercoid
®
Model 3100 Smart Pressure
Transmitter. The Chapters are organized as follows.
Chapter 2 Handling Cautions
Chapter 2 provides instructions on commissioning and operating
the Model 3100 Smart Pressure Transmitters. Informations on
software functions, configuration parameters, and on-line
variables are also included.
Chapter 3 Transmitter Functions
Chapter 3 contains suggestions on handling the Model 3100
Smart Pressure Transmitter.
Chapter 4 Installation
Chapter 4 contains mechanical, environment consideration and
electrical installation instructions for the Model 3100 Smart
Pressure Transmitter.
Chapter 5 On-line Operation
Chapter 5 describes how to configure the parameters of the
Model 3100 Smart Pressure Transmitter. See the following list for
the details.
1. Regulations for circuit's Input/Output characteristics; Sensor
or Output Trim
2. Changing the output characteristic; Range Configuration,
Output Type, Dampening, Unit
3. Changing the general data; Tag No., Date, Message etc.
Chapter 6 Maintenance
Chapter 6 contains hardware diagnostics, troubleshooting and
maintenance task.
Page 2
P-3100:TEMPLATE 3/1/10 11:27 AM Page 3
