P 8
Please retain product label and instructions for future reference
Step 11
(See Pre-Assembly)
Parts needed - No. 9 QTY 1
No. 16 QTY 1
No. 18 QTY 1
No. 22 QTY 2
Following the same method
outlined in
Pre-Assembly
, lay the
remaining boards (
No’s. 9, 16, 18
& 22
) onto the assembly to bring
the board level above the
window and doors.
*Ensure that the boards are
level and flush with each
other as you lay each one.
Step 10
(See Pre-Assembly)
Parts needed - No. 7 QTY 1
Make the assembly level by
adding another right hand
board
(No. 7)
as shown in the
diagram.
**Ensure to stagger the
screws so as not to collide
with the previous screw.
Step 13
Parts needed - No. 19 QTY 1
No. 20 QTY 1
Lay the last two boards (
No. 19
& 20
)
onto the front of the
assembly. Fix into position with
2x70mm screws per board by
screwing through the notches.
*Ensure that the boards are
level and flush with each
other as you lay each one.
4x70mm Screws
22
22
18
9
16
7
22
22
17
8
15
20
IMPORTANT:
Pre-drill before fixing screws.
19
Step 12
(See Pre-Assembly
Parts needed - No. 8 QTY 1
No.15 QTY 1
No. 17 QTY 1
No. 22 QTY 2
Following the same method
outlined in
Pre-Assembly
, lay
the remaining boards (
No’s. 8,
15, 17 & 22
) onto the assembly
to bring the board level x2
boards above the window and
doors.
*Ensure that the boards are
level and flush with each
other as you lay each one.
Pre drill
hole
70mm
screw
