P 6
Please retain product label and instructions for future reference
10
10
9
5
7
7
8
Step 7
Once you have laid the second
level of boards onto the assembly
slide the window(
s
) (
No. 1
)
between the smaller boards and
rest on to the longer board.
*Ensure the boards are level with
each end.
*Please note:
This image is for
illustrative purposes and may
differ from your choice in product
(
regarding window position
).
Nevertheless the process of fitting
the window is the same.
Step 8
Parts Needed - No. 5 QTY 6
No. 7 QTY 11
No. 8 QTY 5
No. 9 QTY 5
No. 10 QTY 12
Following the same method
outlined in
Pre-Assembly
, lay
the remaining boards (
No’s. 5, 7,
8, 9 & 10
) onto the assembly
to bring the board level to the
top of the window and door
frames.
*Ensure that the boards are
level and flush with each
other as you lay each one.
*Doors can be hung once the
boarding has enclosed the
door frame.
9
20
21
24
3
3
Step 9
Parts Needed - No. 9 QTY 1
No. 24 QTY 1
No. 20 QTY 1
No. 21 QTY 1
Following the same method
outlined in
Pre-Assembly
, lay
the last two boards (
No’s. 9
& 20
)
onto the front and rear
of the assembly.
Once in position place log
boards (
No’s. 24 & 21
) onto
the window and plain side.
*Ensure that the boards are
level and flush with each
other as you lay each one.
Step 10
Parts Needed - No. 3 QTY 2
Place the gable (
No. 3
)
onto the assembly. Fix into
position by screwing through
the notches as shown in the
illustration.
*Ensure that the boards are
level and flush with each
other as you lay each one.
4x70mm Screws
Pre drill
hole
70mm
screw
Tip: Ensure the lip on the window frame is located on the inside of the building
