background image

Step 28

Parts needed -          &          &

Fix the Fascias (

No.25 & 26)

 to the 

front and back of the building 

using 3x40mm screws per Fascia. 

 

Fix the Finials  (

No.27

) centrally 

over the Fascias using 2x40mm 

screws per finial.

Ensure to trap the felt between the 

Fascia and the building.

16x40mm Screws

40mm 

screw

25

26

25

27

26

1!

2!

Pre drill 

hole

50kg

 

27

25

26

27

Step 29

Parts needed -          & 

Fix the Black Handle (

No. 29

) to the Door 

using 4x30mm black screws.

Fix the Door Stop (

No. 28

) to the inside of

the  Door Panel at the top and bottom

using 3x20mm screws as shown per door stop.

 

4x 30mm black screws.

6x20mm screws.

20mm 

screw

30mm 

screw

29

28

29

28

1!

2!

Pre drill 

hole

50kg

 

28

It is ESSENTIAL that you apply wood 

treatment immediately after the building 

has been assembled.

AFTER TREATMENT:

score around protective

 cover on glazing and

 carefuly peel

 covering back

Playhouse Maintenance:

It is recommended that the following checks and maintenance are carried out at the beginning 

of each season as well as at regular intervals during the usage season.

- Check all nuts /bolts/ screws for tightness and tighten when required.

- Check for movement / opening of wood giving rise to protrusion of nail heads and tips.

- Check hinges.

- Replace defective parts in accordance with the manufacturers instructions. 

- Check any crossbeams, suspensions and anchors.

- If a swing is included; check the swing seat, chains and ropes.

IF THESE CHECKS ARE NOT CARRIED OUT THE ACTIVITY TOY COULD BECOME A HAZARD

P19

Please retain product label and instructions for future reference

       

DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY 

COMPONENT PARTS PRIOR  TO ASSEMBLY.

Содержание 02DTSHOA08066WBF-V1-PEFC


























Отзывы: