Step 7
Parts needed - &
Place the assembled Door Panel (
No.2
)
and the Window Panel (
No.4
) on top of
the floor, ensuring the panels are posi-
tioned centrally on the floor, as shown in
the illustration.
Fix together by screwing through the
framing of the Door Panel (
No.2
) into the
framing of the Plain Panel (
No.5
) and
Window Panel (
No.4
) using 3x50mm
screws.
Do not secure the building to the
Floor until the Roof is fitted.
9x50mm screws.
50mm
screw
2
4
1!
2!
Pre drill
hole
4
2
1!
2!
Pre drill
hole
Step 8
Parts needed -
Locate Bunk Floor Block A
(No.15)
flush to the horizontal framing on
the Plain Panel
(No.5).
Fix in place using 4x50mm screws.
4x50mm screws.
50mm
screw
15
15
5
1!
2!
Pre drill
hole
Step 9
Parts needed -
Locate the Bunk Floor Support Bar
(No.13)
onto the Door Panel
(No.2)
at a
height of 1010mm from the top of the
floor to the underside of the Support
Bar
(No.13).
Secure in place by screwing through the
Support Bar
(No.13)
into the upright
panel framing using 4x60mm screws.
4x60mm screws.
60mm
screw
13
13
1010mm
2
Step 10
Parts needed - &
Locate one Bunk Floor Block C
(No.17)
flush to the Door panel framing. Ensure the
top of block C is 28mm from the top of the
support bar
(No. 13).
The longest side of the
block should be against the panel framing.
Fix to the Door Panel using 1x40mm screw
through the block into the framing.
Locate Bunk Floor Block B
(No. 16)
on top
of Block C as shown in the diagram.
Fix with 1x40mm screw through the panel
framing into the left end of the block and
1x40mm screw down through block B
(No.16)
into block C
(No. 17)
.
3x40mm screws
1!
2!
Pre drill
hole
17
16
40mm
screw
A
B
16
17
28mm
www.merciagardenproducts.co.uk P8
Please retain product label and instructions for future reference
DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY
COMPONENT PARTS PRIOR TO ASSEMBLY.
Содержание 02DTSHOA0705LFD3WBF-V1-PEFC
Страница 19: ...2 1 3 4...
Страница 20: ...REGISTER FOR YOUR ANTI ROT GUARANTEE TODAY PLEASE SCAN HERE 1 2...
