background image

60mm 

screw

10

1!

2!

Pre drill 

hole

50kg

 

10

Step 14

Parts needed -

Locate the Safety Rail 

(No.10) 

on top of 

the bunk floor, ensure the safety rail is flush 

with the edge of the bunk, as shown in the 

illustration. 

Fix in place using 4x60mm screws through 

the rail into the bunk floor. 

Locate the assembled ladder flush to the 

safety rail and back panel framing.

 

Fix in place with 1x60mm screws, through 

the ladder into the Rail and 3x 40mm 

screws through the ladder into the Floor 

and Back Panel as shown in the diagram.

5x60mm screws

3x40mm screws

40mm 

screw

Step 15

Parts needed -           &   

Locate the Roof Support Bar 

(No. 14)

 in line with the central 

framing of the Gable Tops

 

(No.8).

Fix in place with one Corner 

brace 

(No. 36)

 per end, using 

4x30mm screws per brace.

8x30mm screws

30mm 

screw

14

36

1!

2!

Pre drill 

hole

14

36

14

36

Step 16

Parts needed -          

Place Roof 1 

(No.6)

 onto the shorter 

side of the building, ensuring the roof 

rests into the gaps of the gable framing 

and is flush to the back of the building. 

Make sure the 10mm overhang on the 

roof is at the apex of the building. 

Secure by screwing through the roof 

panel 

(No.6)

 into the gable below using 

6x30mm screws.  

Do not secure the building to the 

Floor until the Roof is fitted.

6x30mm screws

6

6

30mm 

screw

1!

2!

Pre drill 

hole

50kg

 

6

Step 17

Parts needed -          

Place Roof  Panel 2 

(No.7)

 onto the  

building, ensuring the roof rests into the 

gaps of the gable framing and is flush to 

the back of the building. 

Make sure the 10mm overhang on the 

roof is at the apex of the building.

  

Secure by screwing through the roof 

panel 

(No.7)

 into the gable below using 

8x30mm screws.  

Do not secure the building to the 

Floor until the Roof is fitted.

8x30mm screws

7

6

7

1!

2!

Pre drill 

hole

50kg

 

7

30mm 

screw

www.merciagardenproducts.co.uk      P10

Please retain product label and instructions for future reference

       

DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY 

COMPONENT PARTS PRIOR  TO ASSEMBLY.

Содержание 02DTSHOA0705LFD3WBF-V1-PEFC





















Отзывы: