background image

Step 24a

Parts needed -            

Position Support Rail A 

(No. 45)

 on top of 

the Veranda Floor 

(No. 42

, and flush to 

the Front Rail 

(No. 43) 

Fix in place by screwing through the 

Front Rail 

(No. 43) 

into the Support Rail A 

(No. 45) 

and  through the roof into the 

top of the Support Rail using 3x40mm 

screws per rail. 

Make sure access to the Door is not 

blocked and that the door can open and 

close without restrictment.  

3x40mm screws.

45

40mm 

screw

1!

2!

Pre drill 

hole

43

45

Internal View

43

45

Step  25a

Parts needed -

Cut felt 

(No. 40)

  into 3 sheets 

measuring:

1900mm (L) X 1000mm (W)

and lay onto roof. Start at the bottom 

of the roof and work your way up so 

that rain pours over the top of the laps 

and not under them.  Ensure there is a 

50mm overhang around the sides. 

Fix using felt tacks at 100mm intervals.

90 Felt Tacks

Felt 

tacks 

1!

2!

Pre drill 

hole

HANDLE

WITH CARE

1

2

3

4

40

1.

2.

3.

40

www.merciagardenproducts.co.uk      P16

Please retain product label and instructions for future reference

       

DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY 

COMPONENT PARTS PRIOR  TO ASSEMBLY.

Содержание 02DTSHOA0705LFD3WBF-V1-PEFC





















Отзывы: