Mercia Garden Products 01OVLPA08DDGP-V1, Руководство по сборке

Страница: 7 / 19

P 6
Please retain product label and instructions for future reference
IMPORTANT : Pre-drill before fixing screws.
50mm
screw
Pre drill
hole
Step 6
Parts Needed 10x8 - No. 24 QTY 1
Parts Needed 12x8 - No. 35 QTY 1
Place the assembled Back Gable
Panel (please refer to Step 4 if you
have not yet assembled this) and the
Plain Panel
(No. 24 or 35)
next to
each other and onto the floor as
shown in the illustration,
Ensure to position the panels so
there is equal spacing between the
floor and cladding on each side.
Fix the two Panels together by
screwing into the corner using
50mm screws.
3 x 50mm screws
4
5
24
10 x 8
12 x 8
35
4
5
50mm
screw
Pre drill
hole
Step 7
Parts Needed 10x8 - No. 24 QTY 1 (No Window QTY 2)
No. 25 QTY 1 (Fixed Window only)
Parts Needed 12x8 - No. 35 QTY 1 (No Window QTY 2)
No. 36 QTY 1 (Fixed Window only)
IMPORTANT : Pre-drill before fixing screws.
24
25
Place another Plain Panel (No.24 or 35)
next to the previously placed Plain
Panel and fix in place at the corners
using 50mm screws.
On the opposite side of the Shed,
repeat the method used in
Step 6
to fix
either a Window Panel (No.25 or 36) or
another Plain Panel
(No.24 or 35)
onto
your Shed.
Ensure to position the panels so there is
equal spacing between the floor and
cladding on each side.
6 x 50mm screws
10 x 8
12 x 8
35
36