Mercia Garden Products 01OVLPA08DDGP-V1, Руководство по сборке

Страница: 17 / 19

P16
Please retain product label and instructions for future reference
29
30
29
Pre drill
hole
34
29
30
29
34
34
34
32
SILICONE
SEALANT
Place the plastic window cill
(No.32)
onto the Window Panel and
use a silicone sealant to secure in
place, as shown in the illustration.
*please note silicone sealant is not
supplied with your building*
Fit the styrene sheets
(No.34)
on
top of the window cill
(No.32)
.
When positioning the styrene sheets
ensure there is an equal distance
between them and either side of the
windows.
Repeat for both Window Panels.
a
b
34
a
b
34
Step 27 (Fixed Window only)
Parts Needed - No. 32 QTY 2
No. 34 QTY 4
Styrene
Window Cill
Cladding
Side View
Step 28 (Fixed Window only)
Parts Needed - No. 29 QTY 1
No. 30 QTY 2
Using a pencil and a straight edge,
measure the Strips
(No.29 & 30)
to
create
Six 546mm length strips.
Cut along the marked lines to make 6
window strips in total, each measuring
546mm in length.
Locate the Window strips
(No. 29 & 30)
onto the Window Panel,
one either side of the styrene slot in
the panel and one in the centre of the
two pieces of styrene, as shown in the
illustration.
Fix in place using 3x30mm screws per
Trim, ensuring the screws enter the
framing of the window panel and not
the styrene.
18 x 30mm screws.
30mm
screw
IMPORTANT : Pre-drill before fixing screws.
* trim to fit
It is ESSENTIAL that you apply wood
treatment immediately after the building
has been assembled.
AFTER TREATMENT:
score around protective
cover on glazing and
carefuly peel
covering back