Mercia Garden Products 01OVLPA08DDGP-V1, Руководство по сборке

Страница: 16 / 19

P 15
Please retain product label and instructions for future reference
Step 25
Parts Needed - No. 11 QTY 1
No. 23 QTY 1
Using a pencil and a straight
edge, measure the Strip
(No.11)
to
create one 1016mm length strip
and a 530mm length strip.
Cut along the marked lines to make
two door strips, one measuring
1016mm in length, and the other
measuring 530mm in length.
Locate both strips centrally over the
two doors
(No.6),
the longer strip
(1016mm) at the bottom, ensuring it
is flush with the bottom of the doors,
and the shorter strip (530mm) at the
top, ensuring it is flush to the top of
the doors, as shown in the illustration.
Fix the strips to one door (the right
hand door) using 30mm screws.
Locate the remaining turn button
(No. 23) onto the master door and
secure using 1x30mm crew.
6 x 30mm Screws
a
a
b
11
11
30mm
screw
Pre drill
hole
IMPORTANT : Pre-drill before fixing screws.
b
23
* trim to fit
30mm
screw Pre drill
hole
29
29
Step 26 (Fixed Window only)
Parts Needed - No. 29 QTY 1
Using a pencil and a stright edge, measure
the Strip
(No. 29)
to create
two 546mm
length strips per window panel.
Cut along the marked lines to make 2
window strips, each measuring 546mm in
length.
*Please note you have excess strip left over,
keep this to one side as you will require this
in future steps.
Fix 2 window strips to the framing that sits
either side of the window, using 3x30mm
screws per trim, as shown in the illustra-
tion.
Repeat this for both Window Panels.
12 x 30mm Screws
IMPORTANT : Pre-drill before fixing screws.
*
trim to fit