Mercedes-Benz Wallbox Home, Руководство по установке

Страница: 18 / 34

14
PLEASE NOTE!
Factory settings for the Mercedes-Benz Wallbox Home are for maximum charging currents of 16 A (A0009067408 model
variant) and 32 A (A0009067508 model variant). Should the charging current made available by your domestic power sup-
ply or the supply cable itself differ from these settings, the charge current settings must be adjusted accordingly inside the
Wallbox before you replace the electronic components cover and then take the Wallbox into operation. This is described in
detail in section “Setup and test modes” on page 15 and following.
Please note that the rated current indicated on the product label and configured in the firmware must under no circum-
stances be exceeded.
11. Replace the electronic components cover inside the housing base and
fix it into place with its M4 x 10 screw.
12. Hook the housing cover onto the upper edge of the housing base and
lock it using the housing cover key provided.
Note: Before you replace the housing cover, you must complete the pro-
cess of taking the Mercedes-Benz Wallbox Home into operation – please
read the following section for information on this topic.
Taking the Wallbox into operation
After mechanical and electrical installation, you must check the correct functioning of the Mercedes-Benz Wallbox Home for
operation and resolve any errors.
Proceed as follows to take the Mercedes-Benz Wallbox Home into operation:
1. Switch on the upstream MCB in your domestic power distribution.
2. Open the access flap
8
in the internal electronic components cover and also switch on the internal RCCB (the Wallbox is
connected to the electricity grid).
When the Wallbox is connected to the electricity grid, it will initiate the start-up procedure: This includes a test of the internal
electronic components to ensure correct functioning.
The internal check routine is indicated by the LED display on the front of the Mercedes-Benz Wallbox Home as follows.
LED display Description
The LED flashes white once ...
... and then pulsates blue.
The vehicle can now be connected for charging. Initiating and terminating charging procedures is described in detail in the
quick start guide included, as well as in the comprehensive operating manual for the Mercedes-Benz Wallbox Home: You can
download the comprehensive operating manual at
www.yourwallbox.de/downloads/Mercedes-Benz/Home/ . Please also
refer to the operating manual of the vehicle to be charged at the Wallbox.
After the Mercedes-Benz Wallbox Home has been properly taken into operation, replace the housing cover and lock it into
place: This is described in step 12 above.