Mercedes-Benz Wallbox Home, Руководство по установке

Страница: 12 / 34

8
Housing base (detail)
0
Housing cover slot
The plastic lip of the housing cover
4
is inserted into this slot.
q
Grommets for data cables
These grommets seal the openings for data cables in the terminals area of the housing base. Connecting data cables is pos-
sible e.g. in conjunction with a Mercedes-Benz Wallbox Advanced. Please see the relevant information on connections in the
installation manual for the Mercedes-Benz Wallbox Advanced, available at:
www.yourwallbox.de/downloads/Mercedes-Benz/Advanced/
w
Power supply grommet
This grommet seals the opening for the power supply in the terminals area of the housing base.
e
RCCB (residual current circuit breaker)
The RCCB and the adjacent PE terminals are for connecting the power supply.
r
Opening for coded rotary switch
This opening provides access to the coded rotary switch for setting the maximum charge current and to activate set-up and
test modes (see page 21).
t
Opening for LED display
The multi-colored LED display is shown through this opening.
y
Lockable screw for housing cover
This lockable screw is for locking the housing cover. Its key is also included.
u
Mounting slots
The housing base is fixed into position by hooking these two slots onto mounting screws.
i
Cable guide
This cable guide is intended for a surface-mounted power supply cable.
o
Openings for screw fixings
These openings are used to fix the housing base into position with two screws after it has been hooked onto the mounting
slots
u
.
Rear view
Front view
o
w
e
u
i
t
y
r
0
q