Mercedes-Benz TRAVEGO, Руководство по эксплуатации

Страница: 155 / 581

Driver's area controls
Display screen menu control logic
To select a language
M68.00-0528-71
Navigate to the preferred language.
When it is highlighted blue, confirm the
selection using the “OK” button on the
steering wheel.
Note:
Country flag (2) for the selected language
is also displayed.
Display screen menu control logic
Display screen sequence at
start-up
M68.00-0487-71
After the ignition starter switch has
been switched to ON, the first display
to appear on the display screen is the
standby screen with the marque logo.
If a fault occurs at this point, a corres-
ponding fault alert will be displayed.
If no fault occurs, the system checks
whether there are any event notifications
present. If there are, the associated pop-
up window opens and the driver has to
acknowledge the event notifications in
order of their urgency. The system then
verifies whether the supply pressures
for the various compressed-air circuits
are at acceptable levels. If so, the bus
graphic in the “Fahrzeug" (Vehicle) main
menu is then displayed. However, if a
supply pressure is too low, which may be
the case if the vehicle has been parked
up for a long period, a pop-up window
displaying the supply pressures for the
various compressed-air circuits opens.
The pop-up window closes automatic-
ally as soon as the necessary operating
pressure is reached. If the driver ac-
knowledges the pop-up window using
the buttons on the steering wheel before
the correct pressure has been reached,
another pop-up window opens and dis-
plays a red alert informing the driver
once more that the operating pressure
is still too low. If the necessary oper-
ating pressure is now reached, or if the
driver acknowledges the red alert, the
bus graphic in the “Betriebsmeldungen”
(Operating notifications) main menu will
be displayed.
TRAVEGO / TRAVEGO M / TRAVEGO L (Euro VI)/07.2014 GB
143