Mercedes-Benz SLS AMG, Руководство пользователя

Страница: 224 / 253

such as axle or steering components. Oth-
erwise, the vehicle could be damaged.
X
Start the engine.
X
Make sure that the key is in position 2 in
the ignition and that the engine is running
during the entire loading operation.
X
Move the transmission to N with the E-
SELECT lever. Check the transmission posi-
tion in the instrument cluster.
As soon as the vehicle is loaded:
X
Prevent the vehicle from rolling away by
applying the electric parking brake.
X
Shift the transmission to P with the button
in the centre console.
X
Turn the key in the ignition lock to position
0 and remove the key from the ignition
lock.
X
Secure the vehicle.
Electrical fuses
Important safety notes
G WARNING
Only use fuses that have been approved for
Mercedes-Benz vehicles and which have the
correct fuse rating for the systems con-
cerned. Do not attempt to repair or bridge
faulty fuses. Otherwise, a circuit overload
could cause a fire. Have the cause traced and
rectified at a qualified specialist workshop,
e.g. a Mercedes-Benz Service Centre.
!
Only use fuses that have been approved
for Mercedes-Benz vehicles and which
have the correct fuse rating for the system
concerned. Otherwise, components or sys-
tems could be damaged.
The fuses in your vehicle serve to close down
faulty circuits. If a fuse blows, all the compo-
nents on the circuit and their functions stop
operating.
Blown fuses must be replaced with fuses of
the same rating, which you can recognise by
the colour and fuse rating. The fuse ratings
are listed in the fuse allocation chart. A
Mercedes-Benz Service Centre will be happy
to advise you.
If the newly inserted fuse also blows, have the
cause traced and rectified at a qualified spe-
cialist workshop, e.g. a Mercedes-Benz
Service Centre.
Before changing a fuse
X
Park the vehicle and apply the electric park-
ing brake.
X
Switch off all electrical consumers.
X
Remove the key from the ignition lock.
The fuses are located in various fuse boxes:
R
fuse box in the footwell on the front-
passenger side
R
fuse box in the rear
The "Relay and fuse information sheet" is
located with the wheel-change toolkit in the
boot.
Fuse box in the footwell
X
To open: remove the carpet over the foot-
rest.
X
Loosen screws : on the floor panel using
a suitable tool.
X
Remove the floor panel.
X
To close: fit the floor panel again.
X
Screw in and tighten screws : .
X
Put in the carpet and press to secure.
Electrical fuses
221
Breakdown
assista
nce
Z