Mercedes-Benz S 320, Руководство оператора

Страница: 111 / 341

108 Multifunction steering wheel, multifunction display
Technical
data
Instruments
and controls
Operation Driving
Instrument
cluster display
Practical hints Car care Index
Press the
è
or
ÿ
button repeatedly until the
individual setting preliminary display (1) appear.
Press the
j
or
k
button until the required setting
menu (2 to 8) is displayed.
Pressing the
æ
or
ç
button sets the time in
setting menus (2, 3) and controls the selection marker
in setting menus (4 to 8).
The settings made are stored and applied immediately.
The individual setting preliminary display (1) will
appear again after you have run through all the setting
menus.
Pressing the
è
or
ÿ
button displays the next or
previous system.
Notes:
Settings can only be selected with the vehicle stationary
or moving slowly.
The individual setting preliminary display (1) will
appear if you speed up.
The setting menu previously called up will reappear
when the vehicle stops or slows down, providing no
other system has been called up in the meantime.
To return setting menus (4 to 8) to their factory settings:
• Call up the individual setting preliminary
display (1).
• Press the
J
button in the instrument cluster for
approximately 3 seconds. Display (9) will appear.
• Press the
J
button once more, the message
“RESET TO FACTORY SETTINGS” appears in the
display.
The individual setting preliminary display (1) will
appear if you do not press the
J
button within
about 5 seconds. The setting menus will not be
reset.
Setting the audio volume
You can only adjust the volume of the system currently
in use. The volume setting for each system (audio,
telephone, navigation and voice recognition system) is
stored separately.
Setting button:
æ
increases the volume.
ç
reduces the volume.