Mercedes-Benz Energy Storage Home Скачать руководство пользователя страница 5

DeutscheACCUMOTIVEGmbH&Co.KGprovidesaten-
year warranty for each individual module of your energy 
storage system. If you would like to make a claim to this 
manufacturer’s warranty, we would like to ask that you com-
plete and submit the warranty card to the manufacturer as 
soon as your energy storage system has been installed and 
is ready for operation. This is a mandatory prerequisite for 
the manufacturer’s warranty to enter into force.   

The warranty card is enclosed with the Warranty Terms and 
Conditions. Your country-specific Warranty Terms and Condi-
tions are available at:

www.mercedes-benz-energy.com/support

Please note that you need to send in an additional filled-in 
warranty card to the manufacturer for each newly purchased 
module for your energy storage system if you would like to 
extend the manufacturer’s warranty to these new modules.

Text

Use

Example

[Reference; X]

Cross-reference within this document, giving the 
section name and page number after the semicolon

[Montage;p. 11]

  

Warning!

Warnings relating to safety matters which must be 
complied with

  

Never lean over the banister!

Information

Information which is important but not safety- 
related

         Wash your hands before eating.

(1) ....
•....
(2)
(3)
•....

operating instructions with a fixed sequence and 
outcome(•...)

(1) Press on button.
•Pressonbutton.
(2) Enter username and password.
(3)SelectOKtoconfirm.
•Userisloggedon.

The rating plate provides information regarding the primary technical data on your Mercedes-Benz Energy Storage Home. 
It is located beneath the right-hand trunking cover of the energy storage module.

Abbreviation Meaning

Abbreviation

Meaning

SN

Serial number

Weight

Weight of an individual module

Date

Date of manufacture

HW

version

Hardware status

U

N

Battery’s nominal voltage

SW

version

Software status

C

Battery capacity

Q

version

Quality status

E

Energy content of battery

1.5 Warranty

1.6 Signposting within the text

1.7 Rating plate

Symbol

Name

Explanation

CE marking

Manufacturer’s declaration of conformity concerning compliance with all CE-
relevant regulations.

Consult manual

Informs you that the manual and the safety instructions it contains must be read 
and complied with.

EU Batteries Act label

Warning that batteries must be collected separately and not disposed of in 
domestic refuse.

5

Mercedes-Benz Energy Storage Home Manual

 | General instructions

Содержание Energy Storage Home





























Отзывы: