Mercedes-Benz Energy Storage Home, Руководство пользователя, Страница: 16 / 28

4.2.2 Positive terminal
(1) Insert the Hv cable (red) into the positive terminal of
the feed-through terminal block of the bottom-most
energy storage module. Screw it tight (tightening torque
4–4.5 Nm).
(2) Insert the other end of the same Hv cable (red) into the
positive terminal of the feed-through terminal block of the
energy storage module above and screw it tight (tighten-
ingtorque4–4.5 Nm).
(3) Repeat the process until all the energy storage modules
are attached to the positive terminal.
•positiveterminalnowconnected.
The positive terminal of the feed-through terminal block is
markedwith‘
+ ’.
4.2.3 Negative terminal
(1) Insert the negative terminal of the Hv cable (black) into
the negative terminal of the feed-through terminal block
of the energy storage below and screw it tight (tightening
torque4–4.5 Nm).
(2) Insert the other end of the same Hv cable into the
negative terminal feed-through terminal block of the
energy storage module above it and screw it tight (tight-
eningtorque4–4.5 Nm).
(3) Repeat the process until all the energy storage modules
are attached to the negative terminal.
•negativeterminalnowconnected.
The negative terminal of the feed-through terminal block is
markedwith‘
- ’.
2
1
3
3
2
3
3
1
16