Mercedes-Benz Energy Storage Home, Руководство пользователя, Страница: 13 / 28

4.1.1.3 Installing initial energy storage module
(1) Use the slots and bolts provided to attach the initial en-
ergy storage module to the installation rail (upright).
The attached energy storage module must be fitted flush
with the base underneath.
(2) Screw the nuts tight onto the bolts.
•Initialenergystoragemoduleinstalled.
4.1 Set-up
3
4
1
1
2
4
4
1
2
1
2
4.1.1.1 Base
(1) Place the base on the floor.
(2) Lay a spirit level on the base.
(3)Usethehexkey(4 mm)toadjusttheheightofthefeet.
(4) Fasten the feet with the aid of the nuts.
•Baseinstalled.
The Mercedes-Benz Energy Storage Home Gen.1.5 is designed for upright installation and wall installation. Up to four
individual energy storage modules may be stacked vertically on top of each other. If installing five or more energy storage
modules, a second unit will have to be assembled. only use the original parts supplied for installation!
To ensure stable installation check that the base is
horizontally aligned!
4.1.1.2 Fastening installation rail (upright)
(1) Attach the installation rail (upright) to the unit by inserting
the bolts into the slots in the base and energy storage
module.
(2) Screw the nuts tight onto the bolts.
(3) Position the unit against the wall.
(4) Use appropriate screws and dowels to fasten the instal-
lation rail (upright) to the wall to prevent the unit from
tipping over.
•Installationrails(upright)mountedandfastened
to the wall.
Fasten the installation rail (upright) to the wall to
prevent accidental displacement of the unit!
4.1.1 Upright Installation
The underside of the energy storage module exactly fits
onto either the top of the base or the top of another
module.
13 Mercedes-Benz Energy Storage Home Manual | Installation