Mercedes-Benz E-Class Estate 2017, Руководство пользователя

Страница: 417 / 585

#
Therefore, place the filling hose in the
plastic bag that contained the TIREFIT
kit.
+ ENVIRONMENTAL NOTE Environmental
pollution caused by environmentally irre‐
sponsible disposal
Tyre sealant contains pollutants.
#
Have the tyre sealant bottle disposed of
professionally, e.g. at a Mercedes-Benz
Service Centre.
#
Switch off the tyre inflation compressor.
#
Unscrew the filler hose from the valve of the
defective tyre.
#
Store the tyre sealant bottle, the tyre infla‐
tion compressor and the warning triangle.
#
Pull away immediately.
#
Stop after driving for approximately ten
minutes and check the tyre pressure using
the tyre inflation compressor.
The tyre pressure must now be at least
130 kPa (1.3 bar/19 psi).
&
WARNING Risk of accident due to the
specified tyre pressure not being ach‐
ieved
If the specified tyre pressure is not achieved
after a brief drive, the tyre is too badly dam‐
aged. The tyre sealant cannot repair the tyre
in this instance.
Damaged tyres and a tyre pressure that is
too low can significantly impair braking and
handling characteristics.
#
Do not drive on.
#
Consult a qualified specialist workshop.
Countries that have Mercedes-Benz
Service24h: a sticker with the phone number
can also be found in your vehicle, e.g. on the
B‑pillar on the driver's side.
#
Correct the tyre pressure if it is still at least
130 kPa (1.3 bar/19 psi). See the tyre pres‐
sure table on the fuel filler flap for values.
#
To increase the tyre pressure: switch on
the tyre inflation compressor.
#
To reduce the tyre pressure: press pres‐
sure release button 1 next to manometer
2 .
#
When the tyre pressure is correct, unscrew
the filler hose from the valve of the sealed
tyre.
#
Screw the valve cap onto the tyre valve of
the sealed tyre.
#
Pull the tyre sealant bottle out of the tyre
inflation compressor.
The filler hose stays on the tyre sealant bot‐
tle.
414 Breakdown assistance